Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kynar Flex® 2950-05 - PVDF - ARKEMA

Material Data Center offers the following functions for Kynar Flex® 2950-05:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kynar Flex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Kynar Flex® resins are fluorinated thermoplastic copolymers.

Kynar Flex® 2950-05 resin is a pelletized, semi-crystalline VF2 based copolymer. It has been designed for wire and cable applications requiring high flexibility and improved resistance to impact.The low molecular weight allows extrusion conditions that reduce jacket shrink back over fiber optic constructions.

Additional characteristics:
- Excellent thermal stability
- Excellent abrasion resistance
- Excellent chemical resistance
- Impervious to UV degradation
- High Limiting Oxygen Index
- Extremely low smoke emission characteristics

Meets UL910 requirements
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 11.5 cm³/10min ISO 1133
Temperatura 232 °C -
Carga 3.8 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 387 MPa ISO 527
Tensão no escoamento 17 MPa ISO 527
Deformação no escoamento 18 % ISO 527
Deformação nominal na ruptura >50 % ISO 527
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 134 °C ISO 11357-1/-3
Temp. de transição vítrea, 10°C/min -40 °C ISO 11357-1/-2
Temperatura de deflexão térmica, 1.80 MPa 43 °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 57 °C ISO 75-1/-2
Flamabilidade a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espessuras do tubo de teste 1.5 mm -
Cartão Amarelo (yellow card) disponível sim - -
Flamabilidade a espessura h V-0 class IEC 60695-11-10
Espessuras do tubo de teste 0.8 mm -
Flamabilidade conforme índice de oxigênio 95 % ISO 4589-1/-2
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Constante dielétrica, 100Hz 7.05 - IEC 62631-2-1
Fator de dissipação dielétrica, 100Hz 0.12 E-4 IEC 62631-2-1
Resistividade volumétrica específica 2E12 Ohm*m IEC 62631-3-1
Resistência elétrica 1.4 kV/mm IEC 60243-1
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.03 % Sim. to ISO 62
Densidade 1770 kg/m³ ISO 1183
Características
Características
Copolímero
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.